The XXL version is one of the largest machines in the TRENNSO-TECHNIK product portfolio: the SIK screening machine.
Screening machines from TRENNSO-TECHNIK are efficient in the classification of granular and floury bulk materials of different grain sizes. A certain moisture content should not be exceeded. The size of the SIK sometimes exceeds one or the other small car.

4200 mm - the long journey on the screen

The SIK screening machine is manufactured individually in terms of design and dimensions according to customer requirements. From the smallest SIK 500/1200-1 to the currently largest SIK 2000/4200-5, we cover all customer-specific solutions. The free-flowing bulk material goes on a four-meter-long journey over the screening section. At the end there is efficient separation into a maximum of 6 screen fractions.

From cable recycling to slag processing

A SIK sifts dry bulk goods. If they are free-flowing and the raw material is up to 40 mm in size, our screening machine reliably does its job. The SIK screening machine is often used for separating in
- glass recycling
- cable recycling
- slag processing
- non-ferrous metals
- waste wood
and many other applications.

Screening machines from TRENNSO-TECHNIK correspond in their efficiency to the steadily increasing quality demands of industrial recycling. This makes it a valuable component in the recycling and process of recovering high-quality secondary raw materials such as copper and other non-ferrous metals.

SIK - sift dry and dust-tight

The material to be screened reaches the uppermost screen box via a distribution device. The screen boxes are suspended freely and are dustproof. An electric motor causes the screen boxes to vibrate horizontally. The separated fractions of the screen layers run into the screen outlets attached at the end or at the bottom. There the sieved bulk material can e. g. be fed to further process steps or transported for packaging or loading. Find the schematic functionality of a SIK screening machine here in the video: